SOLD!!!

JBL 2425H ( 2426H ) 1" 8ohm drivers & JBL 2370 horns - 4 sets

JBL 2425H Drivers -

1 3/4" edgewound aluminum ribbon voice coil

1 3/4" titanium diaphragm

1" throat exit

70 watts continuous program @ 800Hz

100 watts continuous program @ 1.2kHz

110 dB SPL (1W @ 1m) sensitivity with the 2370 horn

JBL 2370 Horns -

90 x 40 degree nominal dispersion

1" throat entry

uniform on and off horizontal axis response from 630Hz to 16kHz

17.5" wide x 6.8" tall, mounts in 15.75" x 5.3" hole

Full manufacturer's spec sheets in .pdf format can be found on the Parts Express website below.

I am the original owner. These horns have only been used in one bi-amped system crossed over above 1.2kHz, driven by a QSC 1700 amplifier (2 horns per channel) with hard-knee power limiter modules to prevent clipping and overloading at the amplifier outputs. In other words, the voice coils have been well protected from degradation caused by transients and overpowering. They have had a fabric grillecloth over them for most of their life to keep dust and moisture out. They have the original JBL diaphragms in them, have always been kept clean and moisture free. I guarantee them to be in perfect working condition.

The current model 2426H driver is identical to the 2425H except that it can be mounted on a "screw on" type horn, and can be found for around $280 new. The 2370 horns are still in production and can be found for around $160. Here are some examples:

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=294-410
http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=294-420

Asking $250 for each horn/driver combo, or $450 per pair, or $800 for all four.